AL-E656 ELECTROMAGNET (7.5K GAUSS)
Apparatus Supply
- ELECTROMAGNET –
- Made of soft iron, specially design for Hall Effect experiments,
- mounted on a wooden base for stable performance,
- Pole pieces :- 50mm dia. tapered type
- Field :- 7.5kg at 10mm. air gap,
- Energizing Coils: - Two coils each with total resistance of 9 ohms (approx).
- Termination: 4mm Terminals (30A)
Optional:
- DC Power Supply AL-E188: 0-65V,6A
- Patch Cords 4mm 1Mtr. Length: 2No.
|
AL-E188 DC POWER SUPPLY 0-65V, 6A
MAIN FEATURES:
- Independent Output with Variac Control
- Supplies up to 350W total Power
- Highest Output Resolution: 1mV/1mA
- Insulation between three output channels effectively reduce the interference
- Low ripple noise: <300 u Vrms/mVpp
SPECIFICATIONS:
|
- Model No
- Dimensions
- Weights
- Display Type
- Protection
|
- AL-E188
- 320mm (L)x 140mm (H)x 200mm (D)
- About 5.8 Kg
- 3 and Half Digit LED Display For Current
- With Thermal Circuit Breaker
|
|
Voltage: 0-65V
Current: 0-6A
|
|
Variable Output: CV:<0.01%+2mV
CC:<0.01%+1mA
|
|
Variable Output: CV:<0.01%+3mV
CC:<0.01%+3mA
|
- Noise and Ripple (20Hz-7MHz)
|
Variable Output: CV:<300uVrms/2mVpp
CC:<3mArms
|
|
Voltage: 1mV (Variable Output)
Current: 1mA (Variable Output)
|
|
AL-E383 DIGITAL GAUSS METER
Gauss Meter is an instrument to find the Magnetic Field of Any Object
Experiment
To find the Magnetic Flux (Electromagnetic Field of any Object)
DIGITAL GAUSS METER:
- Range: 0-2 K Gauss & 0-20 K Gauss,
- Resolution: 1Gauss at 0-2 K Gauss Range,
- Accuracy: ± 0.5%,
- Display: 3 ½ Digit, 7 Segment LED,
- Power: 220V, 50Hz
- Special Feature: Indicates the direction of the Magnetic field.
SALIENT FEATURES:
- Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
- Instruction manual.
- Connections are brought out through 3Pin Connector
- The trainer is housed in ABS Plastic and Metal Cabinet.
- Size of the trainer set 12”x4.5”
|
AL-E653 TRAVELLING MICROSCOPE
ABOUT SPECTROMETER:
- The travelling microscope consists of a cast iron base with machined vee-top surface and is fitted with 3 levelling screws, one being fixed.
- The microscope can travel horizontally 18cm and vertically 15cm with the help of slides.
- The slow motion knobs are provided for taking accurate readings.
- Vernier readings 0.01mm.
- The Microscope tube consists of an eyepiece 10X with 50mm or 75 mm objective, for holding objects horizontal stage, made of milky cenolite sheet provided on the base
- Packed in beautiful wooden box.
|