Product Detail

AL-E277 3PHASE RESISTIVE LOAD (3KW)

 TECHNICAL SPECIFICATIONS:

• 3 Control switches given board for current control for Each Phase
• Each switch controls 1A current.
• 9 Nos of Rheostats are mounted inside the cabinet having value of 1A.
• Rating of Rheostats are 440Ohm,1A at 415V
• Current Meter is provided for Load Measurement
• Operating Voltage 415V, 50Hz AC (3Phase)

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
• Instruction manual.
• 3 Phase Indications with 25mm Multi Colored Indicators.
• Patch Cords 4mm (Heavy Duty)
• High Voltage Test Points are Provided With 4mm Safety Sockets
• The trainer is housed in Metal cabinet.
• Short Circuit protection with 4Pole MCB.
• Size of the trainer set 18”x24”
• Easy to move as wheels are given

AL-E920 3 PHASE TRANSMISSION LINE MODULE

SCOPE OF LEARNING:

• Study of No load test and Ferranti effects on transmission line.
• Load test and calculation of efficiency, regulation and power flow in pi model of TL.
• Load test and calculation of efficiency, regulation and power flow in short model of TL
• Study of symmetrical and asymmetrical faults on transmission line.
• TECHNICAL SPECIFICATIONS:
• Simulation Model for Transmission Line Constructed Using

1. Resistors (5 Ohm, 600W)
2. Inductor (80 Milli Henry/5A)
3. Capacitance (0.47uF/600V)

• Can Simulate for Medium/Long (125Km/250Km) Length Transmission Line for Pie Model
• Can Simulate for Medium/Long (125Km/250Km) Length Transmission Line for T Model
• Fan cooled table top setup for long life.

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
• High Voltage Test Points are Provided With 4mm Safety Sockets
• Patch Cords 4mm (Heavy Duty) 1Meter Length.
• Panel is modular based with wheel arrangement easy to place and removable covers.
• Size of the trainer set 30”x16”

AL-E302 THREE PHASE AUTO TRANSFORMER

SCOPE OF LEARNING:

• Use of Variac For Voltage Control in 3Phase Power System
• TECHNICAL SPECIFICATIONS:

Power Supplies:

• AC Power Supply 0-415V AT4A
  • Operated on Mains power415, 50Hz +10%

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed.
• Instruction manual.
• Winding Auto Transformer is Copper Wound.
• High Voltage Test Points are Provided With 4mm Safety Sockets/BTI-15 Terminals
• The trainer is housed in Metal cabinet.
• Short Circuit protection with the Fuse.
• Wheels are provided to move easily.
• Approx Weight of the Unit will be nearly 25Kgms.
• Size of the trainer set Approx 20”x12”