skip navigation

Product Detail

Home / Product Details

We freight to all over the world The best Electronics company, AMBEY INTERNATIONAL!

Product Overview

AL-E538D ELECTRICAL MACHINE TRAINER


Discription:

AL-E538D ELECTRICAL MACHINE TRAINER

  • TECHNICAL SPECIFICATIONS:
  • Power Supply Module (Three Phase Input)
  • Digital Power Analysis Meter Module
  • AC Drive Module 1 Phase(10-220 VAC)
  • DC Drive Module (Thyristorized 0-230 VDC)
  • AC Drive Module 3 Phase(10-440 VAC)
  • Variable DC Voltage Module (10-250VDC)
  • Variable Voltage Module Single Phase Output
  • Resistive Load Module
  • Rheostat 300ohm / 2Amps(Separately)
  • Inductive Load Unit
  • Capacitive Load Unit
  • Three Point DC Starter Module
  • DOL Starter Module
  • Slip Ring Starter Module
  • Tachometer
  • Single Phase Transformer 300VA
  • Three Phase Transformer 1000VA

Power Supplies:

  • DC Power Supply 0-230V AT 2A (Field)
  • AC-DC  Power Supply (0-230V,5A) External
    • Operated on Mains power 415V, 50Hz +10%

Digital/Analog Meters:

  • Digital AC Voltmeter Module (0-300V AC)
  • Digital DC Voltmeter Module (0-300VDC)
  • Digital AC Ammeter Module (0-10A AC)
  • Digital DC Ammeter Module (0-10A DC)
  • Digital AC Wattmeter Module
  • Power Factor Meter Module

SALIENT FEATURES:

  • Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.
  • The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet.
  • Instruction manual.
  • Patch Cords 4mm (Heavy Duty)
  • High Voltage Test Points are Provided With 4mm Safety Sockets
  • The trainer is housed in Metal cabinet.
  • Protection with Emergency Stop.
  • Short Circuit protection with the MCB.
  • Size of the trainer set 66”x24”

MOTOR  TECHNICAL SPECIFICATIONS:

  1. DC Shunt Motor Capacity : 1/2HP
  • Cage : Steel Body
  • RPM : 1500 Approx
  • Shaft : Double
  • Current: 2 Amps Approx.
  •  Winding : Armature (A1, A2) , Field (F1, F2)
  • Termination: 4mm Safety Sockets
  • Power Requirement: 220V DC
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

 

  1. DC Series Motor Capacity : 1/2HP
  • Cage : Steel Body
  • RPM : 1500 Approx
  • Shaft : Double
  • Current: 2 Amps Approx.
  •  Winding : Armature (A1, A2)
  • Termination: 4mm Safety Sockets
  • Power Requirement: 220V DC
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

 

  1. DC Compound Motor Capacity : 1/2HP
  • Cage : Steel Body
  • RPM : 1500 Approx
  • Shaft : Double
  • Current: 2 Amps Approx.
  •  Winding : Armature (A1, A2) , Field (F1, F2) Compound Winding (Z1,Z2)
  • Termination: 4mm Safety Sockets
  • Power Requirement: 220V DC
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. Induction Motor (3 Phase)
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM: 1500 Approx.
  • Shaft : Single
  • Current: 4 Amps Approx.
  • Winding : Stator winding,
  • Input Terminal : 3
  • Termination: 4mm Safety Sockets
  • Mounting : : Foot Mounted arrangement
  • Power requirement : 415-440V AC , 50Hz, 3 Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. AC Slip-Ring Induction Motor
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM : 1500 Approx.
  • Shaft : Single,
  • Current : 2 Amp Approx.
  • Input Terminal : R1, R2, R3 and S1, S2, S3
  • Power requirement : 415~440V AC , 50Hz, 3 Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. AC Synchronous Motor Convertable AC Alternator
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM: 1500 Approx.
  • Shaft : Double
  • Current: 2 Amps Approx.
  • Input / Output : R, Y, B and neutral with F1 and F2 Terminal (field Terminal)
  • Input Voltage : 415~440V AC, 50 Hz,
  • Three Phase Output Voltage : 415~440V AC, 50 Hz, Three Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

 

  1. SINGLE PHASE CAPACITOR START Induction Motor (1 Phase)
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM: 1500 Approx.
  • Shaft : Single
  • Current: 4 Amps Approx.
  • Winding : Stator winding,
  • Termination: 4mm Safety Sockets
  • Mounting : : Foot Mounted arrangement
  • Power requirement : 200-220V AC , 50Hz, 1 Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. SINGLE PHASE CAPACITOR STARTCAPACITOR RUN  Induction Motor (1 Phase)
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM: 1500 Approx.
  • Shaft : Single
  • Current: 4 Amps Approx.
  • Winding : Stator winding,
  • Termination: 4mm Safety Sockets
  • Mounting : : Foot Mounted arrangement
  • Power requirement : 200-220V AC , 50Hz, 1 Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. SINGLE PHASE SPLIT PHASE Induction Motor (1 Phase)
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM: 1500 Approx.
  • Shaft : Single
  • Current: 4 Amps Approx.
  • Winding : Stator winding,
  • Termination: 4mm Safety Sockets
  • Mounting : : Foot Mounted arrangement
  • Power requirement : 200-220V AC , 50Hz, 1 Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. Universal Motor (1 Phase)
  • Capacity : 1/2HP
  • Cage : Steel Body
  • RPM: 3000 Approx.
  • Shaft : Single
  • Current: 4 Amps Approx.
  • Winding : Stator winding,
  • Input Terminal : 2
  • Mounting : : Foot Mounted arrangement
  • Power requirement : 200-220V AC/DC , 50Hz, 1 Phase

 

  1. DC Generator Capacity : 1HP
  • Cage : Steel Body
  • RPM : 1500 Approx
  • Shaft : Double
  • Current: 2 Amps Approx.
  •  Winding : Armature (A1, A2) , Field (F1, F2)
  • Termination: 4mm Safety Sockets
  • Power Requirement: 220V DC
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

 

  1. THREE PHASE  AC Alternator
  • Capacity : 1HP
  • Cage : Steel Body
  • RPM: 1500 Approx.
  • Shaft : Double
  • Current: 2 Amps Approx.
  • Input / Output : R, Y, B and neutral with F1 and F2 Terminal (field Terminal)
  • Input Voltage : 415~440V AC, 50 Hz,
  • Three Phase Output Voltage : 415~440V AC, 50 Hz, Three Phase
  • Motor is mounted on Loading arrangement consist of 2 dial type balance and a belt pulley arrangement.

Category:
ELECTRICAL ENGINEERING
product Name:
AL-E538D ELECTRICAL MACHINE TRAINER
Download PDF:
No Catalog Attached