AL-E922 FUEL CELL POWER GENERATION SYSTEM TRAINER

Description

AL-E922 FUEL CELL POWER GENERATION SYSTEM TRAINER:

Description :
This trainer kit is designed for control of PMDC motor using the PEM (Proton Exchange Membrane) Fuel Cell. The working of fuel cell can be analyzed.

FEATURES

• Inbuilt Converter with driver unit.
• Inbuilt Step down power supply.
• Possible points are terminated with a connector for the study of Students.
• Study of Fuel Cell Stack is very easy.
• Power ON indication Switch for input power circuit and Driver module.
• All the important points are terminated with banana connector for monitor/measure/ study the signals using any one of measuring equipment's.

POWER Required

• 1Phase AC : 230V/2A/50Hz

Hydrogen Cylinder Unit

• H2 Pressure in Cylinder: 120-130bar or 1740-1890psi
• Fire Protection : Flash Back Arrestor

                                 (A1,5/HC3,5/PM5,0bar) ISO5175-1
Control Valve :  Cylinder and Tube

• Pressure Gauge :  Cylinder and Tube

Power Converter Unit 

• Digital DC Voltmeter : 0-200V DC.
• Digital ammeter 5A
• Buck or Boost Converter : 26V DC @ 3A
• Display Unit : Motor Control actions

 

Battery Unit

• Rating Battery : 24V/7Ah

PMDC Motor(OPTIONAL)

• Voltage : 24V @ 2A
• Speed : 1500 RPM
• Speed Sensor : Proximity Sensor Feedback(OPTIONAL)

Experiments: 

• Study on Fuel Cell Stack. 
• Determination of Fuel Cell Stack Voltage on NO Load condition.
• Determination of Fuel Cell Stack Power for various Load condition.
• Analyzing the pulse generated for Four Quadrant Chopper Control.
• Controlling the PMDC Motor using the Fuel Cell Stack Power in Open Loop Method on Forward and Reverse Direction.
• Controlling the PMDC Motor using the Fuel Cell Stack Power in Closed Loop Method on Forward and Reverse Direction.

BUNDLE CONTENTS

• PEM Fuel Cell Stack 100W/300W
• Hydrogen Cylinder with control Valve
• Fuel Cell Trainer Kit
• Patch Cords Required
• 3Pin 6A Power Supply Cord
• 2A Fuse Extra
• User Manual
• PMDC Motor
• 24V Battery unit
• Tubes for Fuel Cell to Cylinder

 

DATA ACQUISITION SYSTEM AND PC INTERFACE AND SOFTWARE WILL BE PROVIDED (OPTIONAL)

Technical Details